Tape-ins are gentle when installed well, but slip is the most common complaint - usually at the roots after a couple of weeks. The good news: it is fixable without damaging your hair, if you know why it happened.
Why tape-ins come loose
- Oily or product-coated roots. Natural oils break the bond down faster.
- Heat and humidity. Sweat softens adhesive - our gym guide explains the effect.
- Conditioner on the tape. Slippery product near the bond line is a classic cause.
- Washing too soon after install. Give the tape time to set - see the wash schedule.
How to re-tape safely
- Remove the loose panel gently using the proper tape-in removal method - never rip it out.
- Clean the hair and the weft thoroughly; remove all old adhesive residue.
- Apply a fresh double-sided tape and reapply on a clean, dry section.
- Press firmly for a few seconds and avoid washing for 48 hours.
How long should tape-ins last?
A proper install lasts 6-8 weeks and the hair can be reused several times - see our lifespan guide. A panel that slips after only a few days usually means an installation or preparation problem, not a product problem.
Prevention
Avoid heavy oils and conditioners at the roots, keep conditioner on the lengths only (see care 101), and brush gently with the detangling technique. Fine hair needs extra care - see thin & fine hair.
For salons
Offer re-taping as a service and teach clients the signs of slip - it builds repeat bookings. Our pricing guide and upsell guide cover the business side.
Source reliable tape and hair from the catalogue and request samples to test adhesive strength before you recommend it.


